
Product Information
Description
APC APCK1069 Multiport Valve Repair Kit -- Pentair Pac-Fab 2-Inch
OEM-equivalent spider gasket and O-ring kit for 2-inch Pentair Pac-Fab top-mount multiport valves.
The APC APCK1069 (legacy P/N APCKIT70) is the service kit for Pentair Pac-Fab 2-inch top-mount multiport valves (also used by Praher under the same body design). Includes the spider gasket and all wear O-rings for a complete rebuild of one 2-in multiport.
| Manufacturer | APC |
|---|---|
| Kit Type | Multiport Valve Repair Kit |
| APC Catalog # | APCK1069 |
| SKU | PST-90-249-3070 |
| APC Cross-Reference | APCK1069 |
| Equipment Family | Pentair Pac-Fab 2-Inch Top-Mount Multiport Valves |
|---|---|
| Also Fits | Praher 2-Inch TM Series Valves (shared body design) |
| Fitment Note | 2-inch body only. 1.5-inch Pac-Fab valves use APCK1067 / APCK1067S. Check the plumbing diameter cast into your valve body. |
| Spider Gasket | 1 (6 or 7-port pattern, 2-in body) |
|---|---|
| Diverter Assembly O-Rings | Per OEM diagram |
| Stem / Cover O-Ring | 1 |
| Small Hardware | As required per OEM diagram |
- Pentair Pac-Fab 2-Inch Top-Mount Multiport Valves
- Praher 2-Inch TM Series Valves (shared body design)
Do I need APCK1069 or APCK1069S?
APCK1069 is the gasket-and-O-ring kit. APCK1069S adds the rotor spring -- use that one if your handle does not click positively into each port detent.
Will this fit on a HiFlow Pac-Fab valve?
No. The 2-inch HiFlow has its own body design and takes APCK1073S. The standard Pac-Fab 2-in body takes this kit.
Can I install this myself?
Yes. Shut off the pump, remove the valve cover, lift the rotor, swap the spider gasket and stem O-rings, lubricate with pool-grade silicone, and reassemble. Allow 30 to 60 minutes.
Additional Info
| Category | Parts Pool Parts Pool Valve Parts |
| SKU | PST-90-249-3070 |
| MPN | 65070 |
| Manufacturer | Pooltek |
| Weight | 0.26 lb |