
Product Information
Description
Generic #12 Winterizing Plug, 2" Fitting
Tapered to seal a range of openings.
Generic #12 is a tapered rubber expansion winterizing plug with a stainless steel screw and washers and a nylon wing nut. The #12 is sized for 2" fitting. The tapered sides let one plug seal a range of slightly different openings.
| Brand | Generic |
|---|---|
| Plug Size | #12 |
| Fits | 2" fitting |
| Style | Tapered rubber expansion plug |
| Hardware | Stainless steel screw and washers |
| Wing Nut | Nylon |
| Use | Winterizing pool returns and plumbing lines |
| Sold As | Each |
Pipe, fitting or tube: which one do I have?
A pipe size means the plug goes straight into the open end of the pipe itself. A fitting is the socket or threaded opening a pipe slides into, which is wider than the pipe of the same nominal size, so it takes a bigger plug. Tube sizes are for thin-wall tubing. If you are not sure, measure the inside of the opening and compare it with the rated diameter in the specs.
Will a winter plug stop freeze damage by itself?
No. A plug keeps water out of a line you have already cleared. Blow the line out and lower the water below the returns first, then set the plug. Snug the wing nut by hand until the rubber grips; a plug cranked tight all winter is harder to back off in spring.
Additional Info
| Category | Pool Products Pool Maintenance Tools |
| SKU | PST-99-555-1010 |
| MPN | 99-555-1010 |
| Replaces | 6693-0, _6693-0, TPC-601-1560 |
| Manufacturer | Generic |
| Weight | 0.34 lb |