Product Information
Description
- 0 TDS Pure Water
- Made in USA
- No Electricity
The End of Water Spots.
Professional-grade deionized water that eliminates mineral deposits, dries streak-free without toweling, and protects every surface it touches.
Why Deionized Water
What Sets DI Water Apart
Tap water is loaded with dissolved minerals that leave behind stubborn white spots when it evaporates. Deionized water changes everything.
Spot-Free Finish
Zero dissolved minerals means zero residue. DI water evaporates completely clean, no spots, no streaks, no towel drying required.
Active Cleaning Power
Ultra-pure DI water naturally seeks equilibrium, actively drawing embedded dirt and mineral deposits from paint, glass, and chrome at the molecular level.
Built for Professionals
Industrial-strength housings with high-flow ports, pressure relief valves, and quick-change cartridges engineered for daily commercial use.
"You spend hours perfecting the detail, your rinse water should match that standard."
Tap water contains calcium, magnesium, iron, and dozens of other dissolved minerals. The moment it evaporates from your paint, those minerals are left behind as stubborn white spots that etch into your finish over time. Crystal Quest DI systems remove 100%* of those minerals before they ever reach your vehicle.The Science
How DI Water Filtration Works
Our systems use mixed-bed ion exchange resin to strip every dissolved mineral from your water. No electricity, no waste water, no complicated setup.
-
1
Water Enters
Tap water with dissolved minerals flows into the system under normal hose pressure. No pump or electricity needed.
-
2
Ion Exchange
Mixed-bed resin captures dissolved solids, calcium, magnesium, iron, and more, and exchanges them for pure H⁺ and OH⁻ ions that recombine as water.
-
3
0 TDS Out
Laboratory-grade pure water exits at 0 PPM TDS*. Rinse your vehicle and let it air dry, no spots, no streaks, no towel needed.
Versatile Performance
More Than Just Cars
Anywhere mineral deposits are a problem, DI water is the solution. Our systems are trusted by professionals across industries.
-
Vehicles & Fleet
Cars, trucks, motorcycles, RVs, and commercial fleets. Perfect for mobile detailers and car wash operations of any size.
-
Marine & Aviation
Boats, yachts, and aircraft. DI water prevents mineral etching on gel coat, fiberglass, polished aluminum, and windshields.
-
Glass & Solar
Commercial window cleaning, solar panel maintenance, and greenhouse glass. Spot-free results without squeegees.
Common Questions
Frequently Asked Questions
Everything you need to know before upgrading your rinse water.
What is deionized water and how does it prevent spots?
Deionized (DI) water has had virtually all dissolved minerals removed through ion exchange resin. Water spots are caused by minerals like calcium and magnesium left behind when water evaporates. Since DI water contains no dissolved minerals, it evaporates completely clean, leaving zero spots, streaks, or residue on any surface.
Does DI water damage paint or clear coat?
No. DI water is safe for all automotive surfaces including paint, clear coat, chrome, glass, and vinyl wraps. Because it contains no dissolved minerals or chemicals, it is actually gentler on surfaces than regular tap water. DI water is the same grade of purified water used in pharmaceutical and electronics manufacturing.
How does DI compare to reverse osmosis for car washing?
Both produce pure water, but DI is far better suited for car washing. RO systems waste 2-4 gallons for every gallon produced, run at very low flow rates (under 1 GPM), and require electricity and a pressurized tank. DI systems produce water on demand at 2-6 GPM with zero waste water and no electricity. For portable, high-flow, on-demand spot-free rinsing, DI is the clear choice.
Can I use the system with my existing garden hose?
Yes. All systems include adapters to connect to standard garden hose fittings. Simply connect your water supply to the inlet, attach your rinse hose to the outlet, and you're ready to go. The system operates entirely on water pressure, no electricity required.
Do I need a pre-filter?
A carbon pre-filter is recommended if your water is chlorinated. Chlorine degrades DI resin over time, so removing it first extends cartridge life significantly. A sediment pre-filter is also helpful if your water contains visible particles. Crystal Quest offers compatible pre-filter housings and cartridges.
What else can I use the system for besides cars?
DI water is ideal for any application where spot-free results matter, boats and yachts, RVs, motorcycles, commercial window cleaning, solar panel maintenance, aircraft, and industrial equipment. Anywhere mineral deposits are a problem, DI water is the solution.
Your Order
What's in the Box
Every Crystal Quest Spot-Free System ships ready to install. Here's what each configuration includes.
Personal System Package
- 2 7/8" × 20" filter housing with pressure relief valve
- Premium mixed-bed DI resin cartridge (pre-installed)
- 1" connection port with garden hose adapters included
- Housing wrench for cartridge changes
- Wall mounting bracket with hardware
- Installation and operation manual
- Optional: Pre-assembled aluminum stand
Professional Portable Pro Package
- 4 5/8" × 20" Big Blue housing with pressure relief valve
- Premium mixed-bed DI resin cartridge (pre-installed)
- 1" NPT connection with garden hose adapters included
- Inlet/outlet pressure gauges
- Housing wrench for maintenance
- Wall mounting bracket with hardware
- Shut-off valve
- Installation and operation manual
- Optional: Pre-assembled heavy-duty stand
Professional MAX Package
- Two 4 5/8" × 20" Big Blue housings with pressure relief valves
- Dual premium mixed-bed DI resin cartridges (pre-installed)
- 1" NPT connections with garden hose adapters included
- Interconnecting plumbing kit
- Dual pressure gauge set
- Two housing wrenches
- Dual wall mounting brackets with hardware
- Shut-off valves
- Complete installation kit
- Optional: Pre-assembled dual stand
Maintenance
Replacement DI Cartridges & Resin
The DI cartridge is the only component you'll replace regularly. Swap it out when your TDS meter reads above 10 PPM, no tools required.
| Product | SKU | Details |
|---|---|---|
| DI Resin Cartridge (2 7/8" × 20") | CQE-RC-0501 | Fits Personal system |
| DI Resin Cartridge (4 5/8" × 20") | CQE-RC-0503 | Fits Professional & MAX |
| Bulk Mixed-Bed DI Resin (1 cu ft) | CQE-RM-05021 | For manual cartridge refilling |
Cartridge life depends on your water's TDS level. At 200 PPM (U.S. average), expect 3-6 months with typical use.
Common Questions
Parts & Maintenance FAQ
How do I know when to replace the DI cartridge?
Use a TDS meter to monitor your output water. Fresh DI resin produces 0 PPM water. When your output TDS rises above 10 PPM, it's time to replace or refill the cartridge. Visual indicators include the resin changing from its original color to a uniform dark amber or brown.
Can I refill the cartridge with bulk resin instead of buying a new one?
Yes. If you prefer to refill rather than replace, our 1 cubic foot bulk mixed-bed DI resin (CQE-RM-05021) lets you repack your existing cartridge shells. This is the most cost-effective option for high-volume users who go through resin quickly.
Does the same cartridge fit all three systems?
No. The Personal system uses the smaller 2 7/8" × 20" cartridge (CQE-RC-0501). The Professional and Professional MAX both use the larger 4 5/8" × 20" Big Blue cartridge (CQE-RC-0503). The MAX simply uses two of the Big Blue cartridges.
How long does a cartridge last?
Cartridge life is directly tied to your water's TDS level. At 200 PPM, roughly average for U.S. municipal water, the Personal cartridge handles about 180 gallons (36 vehicle rinses), the Professional handles about 360 gallons (72 rinses), and the Professional MAX handles about 720 gallons (144 rinses). Lower TDS water dramatically extends cartridge life.
Installation Guide
Set Up Your Spot-Free System
Every system ships with the DI cartridge pre-installed and ready to go. Setup takes 10-20 minutes depending on your configuration, no plumbing experience required.
Ideal for home enthusiasts washing 1-3 cars per week.
Personal System: Quick Setup (10 Minutes)
- Unpack and verify all components against the packing list
- Position the pre-assembled stand on a stable surface, or mount the wall bracket near your water source
- Verify that the pre-installed DI cartridge is secure and the O-ring is properly seated
- Connect your water supply hose to the inlet using the 1" fitting (garden hose adapters included)
- Attach your spot-free rinse hose or nozzle to the outlet
- Turn on the water and flush the system for 2-3 minutes to clear resin fines
- Test output with a TDS meter, should read 0-5 PPM
- Begin spot-free washing
Built for mobile detailers and daily professional use.
Professional Portable Pro: Standard Setup (15 Minutes)
- Select your installation location near a water source
- Position the pre-assembled stand or mount the wall bracket
- Verify the pre-installed cartridge is secure and the O-ring seal is intact
- Install pressure gauges using Teflon tape on all threaded connections
- Connect your water supply using the 1" NPT fitting (adapters included)
- Install the inlet shut-off valve
- Slowly turn on the water and check all connections for leaks
- Flush 5-10 gallons through the system until the TDS meter reads 0
- Your system is ready for professional use
Designed for high-volume operations and small car wash businesses.
Professional MAX: Dual Setup (20 Minutes)
- Position the pre-assembled dual stand on a level surface
- Verify both DI cartridges are properly installed and O-rings are seated
- Connect the two housings using the included interconnect plumbing kit
- Install pressure gauges on both units using Teflon tape
- Connect the main water supply to the inlet and your rinse hose to the outlet
- Install shut-off valves at both the inlet and between the two housings (for individual cartridge replacement)
- Slowly pressurize the entire system and check all connections for leaks
- Flush 10-15 gallons through the system
- Verify 0 TDS output and proper flow rate on both gauges
Installation Tips: Use Teflon tape on all threaded connections. Hand-tighten plastic fittings plus 1/4 turn only, over-tightening can crack housings. Install a pressure regulator if your water pressure exceeds 80 PSI. Add a carbon pre-filter for chlorinated water to extend resin life. Always protect the system from freezing temperatures.
Keep It Running
Maintenance Schedule
DI systems require minimal maintenance. Here's your complete care schedule.
| Frequency | Task | Time |
|---|---|---|
| Before Each Use | Check TDS reading with meter | 30 seconds |
| Weekly | Inspect connections for leaks, log usage | 2 minutes |
| Monthly | Clean housing exterior, inspect O-rings | 5 minutes |
| When TDS > 10 PPM | Replace or refill DI cartridge | 10 minutes |
| Annually | Replace O-rings, deep clean housings | 20 minutes |
Quick Fixes
Troubleshooting Guide
| Symptom | Solution |
|---|---|
| High TDS reading | Replace the exhausted DI cartridge |
| Low flow rate | Check for kinks in hoses; clean or replace pre-filter if installed |
| Leaking connections | Re-apply Teflon tape to threads; inspect and replace O-rings if worn |
| Pressure drop across housing | Gently shake or tap the housing to loosen compacted resin |
| Still getting spots | Verify TDS is below 10 PPM; check for soap residue on the vehicle |
| Cloudy water on first use | Normal, flush 2-5 minutes to clear loose resin fines |
Common Questions
Installation FAQ
Do I need any plumbing experience?
No. All systems ship with the cartridge pre-installed and include all adapters, fittings, and Teflon tape. If you can connect a garden hose, you can set up this system. The optional pre-assembled stands mean you don't even need to mount anything, just set it down and connect your hoses.
What type of water source connection do I need?
All systems include adapters for standard garden hose connections. The native port size is 1" NPT (Professional and MAX) or 1" (Personal), but the included adapters make them compatible with standard 3/4" garden hose fittings found on any outdoor spigot.
Can I leave the system outdoors?
The system can be used outdoors, but it should be protected from direct sunlight when not in use (UV degrades plastics over time) and must be brought inside or drained if temperatures drop below freezing. Frozen water inside the housing can crack the vessel.
How do I replace the cartridge?
Turn off the water supply and release pressure using the pressure relief button on the housing cap. Use the included housing wrench to unscrew the sump (bottom half). Remove the old cartridge, drop in the new one, and screw the sump back on. Flush 2-5 minutes before use. The whole process takes about 10 minutes.
Technical Details
Performance Specifications
| Model | Flow Rate | Peak Flow | Cartridge Size |
|---|---|---|---|
| Personal | 2-3 GPM | 4 GPM | 2 7/8" × 20" |
| Professional | 4-6 GPM | 8 GPM | 4 5/8" × 20" |
| Professional MAX | 4-6 GPM | 8 GPM | Dual 4 5/8" × 20" |
Resin Life
DI Resin Capacity by Water Hardness
Higher TDS water exhausts resin faster. Use a TDS meter to test your tap water and estimate your cartridge life.
| Input TDS | Personal | Professional | Professional MAX |
|---|---|---|---|
| 50 PPM | ~720 gal / 144 rinses | ~1,440 gal / 288 rinses | ~2,880 gal / 576 rinses |
| 100 PPM | ~360 gal / 72 rinses | ~720 gal / 144 rinses | ~1,440 gal / 288 rinses |
| 200 PPM | ~180 gal / 36 rinses | ~360 gal / 72 rinses | ~720 gal / 144 rinses |
| 300 PPM | ~120 gal / 24 rinses | ~240 gal / 48 rinses | ~480 gal / 96 rinses |
| 400 PPM | ~90 gal / 18 rinses | ~180 gal / 36 rinses | ~360 gal / 72 rinses |
| 500 PPM | ~72 gal / 14 rinses | ~144 gal / 28 rinses | ~288 gal / 57 rinses |
Based on approximately 5 gallons per vehicle for the final spot-free rinse.
Pro Tip: Most U.S. tap water falls between 150-400 PPM. You can check your local water quality report or test it yourself with an inexpensive TDS meter. Lower TDS = more rinses per cartridge = lower cost per vehicle.
Physical Specs
Dimensions & Weight
| Measurement | Personal | Professional | Professional MAX |
|---|---|---|---|
| Housing Diameter | 2 7/8" | 4 5/8" | Dual 4 5/8" |
| Housing Height | 20" | 20" | 20" |
| With Stand (W × D × H) | 8.5" × 7.75" × 32" | 8.5" × 7.75" × 32" | 17" × 7.75" × 32" |
| Weight (Empty) | 15 lbs | 28 lbs | 55 lbs |
| Weight (Filled) | 25 lbs | 45 lbs | 90 lbs |
| Connection | 1" (adapters included) | 1" NPT (adapters included) | 1" NPT (adapters included) |
Operating Limits
Operating Parameters
| Parameter | Range |
|---|---|
| Operating Pressure | 20-80 PSI (optimal: 40-60 PSI) |
| Operating Temperature | 40-100°F (optimal: 60-80°F) |
| pH Range | 5-9 |
| Maximum Input TDS | 1,000 PPM |
| Output Water Quality | 0-5 PPM TDS* |
| Power Requirements | None, pressure operated |
Common Questions
Specifications FAQ
What does "TDS" mean and why does it matter?
TDS stands for Total Dissolved Solids, the combined measurement of all minerals, salts, and metals dissolved in your water, measured in parts per million (PPM). Higher TDS means more minerals that cause water spots, and more work for your DI resin to remove. Knowing your water's TDS helps you predict cartridge life and choose the right system size.
What ions does mixed-bed DI resin remove?
Mixed-bed DI resin effectively removes all common dissolved ions including calcium, magnesium, sodium, potassium, iron, copper, manganese, chlorides, sulfates, nitrates, bicarbonates, phosphates, and ammonia. It also reduces silica, though silica removal efficiency can vary depending on concentration and water chemistry.
Why does the system not need electricity?
DI filtration is a passive ion exchange process, the resin beads swap dissolved minerals for hydrogen and hydroxide ions as water passes through under normal water pressure. There are no pumps, no UV lamps, and no electronic controls. Just connect to any pressurized water source (garden hose, spigot, pressure washer bypass) and the system works.
What happens if my input water exceeds 1,000 PPM?
The system will still function, but the resin will be exhausted very quickly, making it impractical and expensive. For water above 1,000 PPM, we recommend a reverse osmosis pre-treatment stage to bring TDS down before the DI polish. Contact our team at 1-800-934-0051 for a custom solution.
Quick Compare
Which System Is Right for You?
All three use the same premium mixed-bed DI resin and produce identical water quality. The difference is capacity and throughput.
| Feature | Personal | Professional | Professional MAX |
|---|---|---|---|
| Cartridge size | 2 7/8" × 20" | 4 5/8" × 20" | Dual 4 5/8" × 20" |
| Flow rate | 2-3 GPM | 4-6 GPM | 4-6 GPM |
| Capacity @ 200 PPM | ~180 gallons | ~360 gallons | ~720 gallons |
| Vehicle rinses @ 200 PPM | ~36 | ~72 | ~144 |
| Cars per week | 1-3 | 10-50 | 50+ |
| Best for | Home enthusiasts | Mobile detailers | Car wash operations |
| Empty weight | 15 lbs | 28 lbs | 55 lbs |
| Portability | Excellent | Great | Good |
Find Your Fit
Choose Your Spot-Free System
All three systems produce the same 0 PPM* laboratory-grade water. Choose based on your volume and portability needs.
Personal System
Compact single cartridge for home enthusiasts. Handles 1-3 cars per week with excellent portability. Available with or without stand.
Professional Portable Pro
The go-to system for mobile detailers. Big Blue cartridge handles 5-10 cars daily at 4-6 GPM flow. Pressure gauges and shut-off valve included.
Professional MAX
Dual Big Blue configuration for high-volume operations. Double the capacity with independent shut-off valves for seamless cartridge swaps without downtime.
Not Sure Which System You Need?
Tell us about your operation and water conditions, our team will recommend the perfect setup.
*TDS and removal performance claims assume typical municipal water conditions. Water with elevated levels of silica or dissolved carbon dioxide may reduce ion exchange resin efficiency and affect output TDS readings. Contact us for guidance on challenging water conditions.
Additional Info
| Category | Home & Garden Water Filtration Inline Water Filters |
| SKU | sku-43620280893533 |
| MPN | |
| Manufacturer | Crystal Quest Water Filters |
| Weight | 0.0 lb |
Let customers speak for us
No issues with it. I received great customer service ensuring I chose the right thing and shipping was really fast.
Can not say enough about the Balboa retro fit system. I’m no expert, but I watched a you tube video and installed it myself. Hot tub is 14 years old and is up and running like new. Very pleased with my purchase. Thank you.
The process was smooth and lights arived as expected. Everything test out in good working order.
Needed to replace the control overlay on our Nordic Impulse hot tub, but could not find out the make or model number of the actual control panel on our tub. By taking measurements and photos or our actual control panel button positions and functions, I was able to narrow down the options. I ordered this overlay as the button positions seemed to be in the right positions, even though the overall size was smaller than the control panel. The overlay works, in that all buttons and functions are in the right place, and the overlay seems to have adhered well to the panel. It is not a perfect match, as it is smaller overall than it should be. But I am happy with the result and will buy an additional identical overlay as a backup in case this one, too, deteriorates at some point. Took a lot of detecting, but the result is successful!
This costume is legit. It has the sparkle, glittery sheen to it like the one used on screen! Very happy with it!!
Excellent service!
PST was great at communicating the status of my order throughout the various stages. I actually did encounter a shipment issue and they handled it without issue. I will be doing business again with them.
PST was great at communicating the status of my order throughout the various stages. I actually did encounter a shipment issue and they handled it without issue. I will be doing business again with them.
as described, fast shipping
My wife has RA and is always uncomfortable. Our hot tub heater failed and all the local shops were not able to assist until November. I was able to order an exact replacement part which was delivered within 3 days the hot tub was up and functioning in three days. I was very impressed with the quality and service.
Good quality just ordered wrong size and also need thicker cover
Fit perfectly, and fast shipping
Super fast shipping and reliable product !
I accidentally broke the original knob by tightening it too much. This was a perfect fit and works 100%. Fast delivery too!
Swapped out broken heater (lasted about 6 years) for this one. The instructions are for the electronics, not for the plumbing. You must get everything perfectly aligned or the plumbing may leak. I needed to loosen the electronics box to get the plumbing perfectly aligned. I have hot water again.
