
Product Information
Description
SpaPure Spa Oxidizing Shock 2.2 lb, Non-Chlorine MPS Shock for Hot Tubs
Oxygen based shock. No added chlorine.
SpaPure Spa Oxidizing Shock (MPN C002476-CS20B3, SKU PST-SPA2476CS20B3) is a 2.2 lb granular, oxygen based oxidizer that shocks spa water without putting any chlorine into it. The formula runs on 45% potassium monopersulfate, dissolves fast, and pulls out the body oils, lotions, and organic waste that leave water looking dull and leave your sanitizer working harder than it should. Dose it weekly at 1.5 oz per 200 gallons, and spa entry can happen shortly after you add it.
| Product Type | Non-chlorine oxidizing shock (MPS) |
|---|---|
| Active Ingredient | Potassium monopersulfate, 45% |
| Other Ingredients | 55% |
| Form | Quick dissolving granular |
| Chlorine Content | None. Contains no chlorine |
| Oxidizer Base | Oxygen based |
| Standard Dose | 1.5 oz (2 Tbsp) per 200 gallons of spa water |
|---|---|
| Frequency | Weekly in most cases |
| Heavy Use | Add more frequently when spa use increases or bather load is above normal |
| Application Method | Broadcast over the entire spa water surface with the pump running |
| Spa Re-Entry | Shortly after adding to the water |
| Treatments Per 2.2 lb | Approximately 23 doses at 1.5 oz each |
| pH | 7.2 to 7.6 |
|---|---|
| Total Alkalinity | 100 to 120 ppm |
| Effect on Chlorine Level | None. Does not add free chlorine |
| Sanitizer Role | Revitalizes chlorine or bromine sanitizers |
| Brand | SpaPure |
|---|---|
| Manufacturer | Haviland Consumer Products |
| Net Weight | 2.2 lb |
| MPN | C002476-CS20B3 |
| SKU | PST-SPA2476CS20B3 |
| UPC | 025551323408 |
| Shipping Weight | 2.6 lb |
| Shipping Dimensions | 4 in x 4 in x 9 in |
- Chlorine sanitized spas and hot tubs
- Bromine sanitized spas and hot tubs
- Silver ion and mineral cartridge sanitizer systems
- Low chlorine maintenance programs where clarity still has to hold
- Portable spas, hot tubs, and swim spas
How much do I add, and how soon can we get back in?
Use 1.5 ounces (2 tablespoons) per 200 gallons of spa water weekly in most cases. Broadcast it over the entire water surface with the pump running so it disperses, and add it more often if your spa is getting heavier use than normal. Because the granules dissolve quickly, spa entry can occur shortly after you add it.
Will this raise my chlorine or bromine level?
No. This is an oxygen based, non-chlorine oxidizer and it contains no chlorine. It removes the wastes and contaminants that were eating up your sanitizer, which revitalizes the chlorine or bromine already in the water. That also makes it the right companion shock if you run a silver ion or mineral cartridge system and are trying to hold down the amount of chlorine you use.
How should I handle and store it?
Balance the water first, to a pH of 7.2 to 7.6 and total alkalinity of 100 to 120 ppm, then dose. Always add the product to water, never water to the product, and never mix it with other chemicals, including chlorine or bromine products, in the same container or scoop. Store it sealed in a cool, dry spot away from children and pets, and read the container label in full before use.
Additional Info
| Category | Spa Products Spa Chemicals |
| SKU | PST-SPA2476CS20B3 |
| MPN | C002476-CS20B3 |
| Manufacturer | Haviland Consumer Products |
| Weight | 2.6 lb |