
Product Information
Description
- Genuine AquaPro Part
- 3/4 HP TEFC Motor
- 1-1/2 in Connections
- Free Shipping
AquaPro AL75 Complete Replacement Pump, 3/4 HP, 115V (10081-ACC)
The pump from AquaPro's AL75 sand system.
The AquaPro 10081-ACC is the complete pump AquaPro lists in the parts breakdown of its AL75 above ground sand filter and pump system. It is the system's 3/4 HP, 115V pump with a totally enclosed, fan-cooled (TEFC) motor and 1-1/2 in suction and discharge connections.
Why PST Customers Pick This
Made for the AL75 System
AquaPro lists 10081-ACC as the AL75 complete pump in the parts breakdown of its AL75 sand filter and pump system, model APASFAL75.
TEFC Motor
AquaPro specifies a totally enclosed, fan-cooled (TEFC) pump motor on the AL75 system for quiet operation.
Strainer Basket Built In
The pump has a lid, a basket with handle and a pre-filter basket housing. AquaPro says to clean the pump strainer and skimmer baskets regularly to protect the pump.
How It Primes
With the water source above the pump, it primes itself once the suction and discharge valves are open. Otherwise, fill the trap and pump with water, then refit the trap cover by hand only.
45 GPM System Flow
AquaPro rates the AL75 system at 45 GPM with 1-1/2 in pipe, and designs its sand filter and pump systems for pools up to 20,000 gallons.
Molded-In Thread Stops
The suction and discharge connections have molded-in thread stops, so don't screw pipe in past them. AquaPro also calls for a gate valve in the suction piping.
Electrical Notice
AquaPro says only qualified, licensed personnel should install the pump and wiring, and the 115V, 60 Hz pump must be wired to the main power supply by a licensed professional. Never run the pump dry, which can damage the seals and cause leaks, and turn the pump off before changing the filter valve position.
Specifications
| Identification | |
|---|---|
| Manufacturer | AquaPro Systems |
| Part Number | 10081-ACC |
| AquaPro Description | AL75 Complete Pump |
| Series | AL Series |
| SKU | PST-34-247-1081 |
| Motor & Electrical | |
| Horsepower | 3/4 HP (0.75 hp) |
| Voltage | 115V |
| Frequency | 60 Hz |
| Motor Type | TEFC (totally enclosed, fan-cooled) |
| Hydraulics | |
| Pump Type | Above ground pool pump |
| Suction | 1-1/2 in |
| Discharge | 1-1/2 in |
| AL75 System Flow Rate | 45 GPM |
| Fitment & Service Parts | |
| Used In | AquaPro AL75 sand filter and pump system (APASFAL75) |
| Pump Lid | 10061-ACC |
| Pump Lid O-Ring | 10062-ACC |
| Basket with Handle | 10063-ACC |
| Impeller & Shaft Seal Kit | 10068-ACC |
| Motor Kit (.75 hp) | 10070-ACC |
| Pump Union O-Rings | 10080-ACC (2 per pump) |
Frequently Asked Questions
How do the AquaPro AL50 and AL75 systems differ?
AquaPro lists the AL50 system with a 1/2 HP pump, 1-1/4 in pipe and 30 GPM, and the AL75 with a 3/4 HP pump, 1-1/2 in pipe and 45 GPM. The 10081-ACC is the AL75 pump.
Which AL75 pump parts are sold separately?
AquaPro's AL75 parts list includes the pump lid (10061-ACC), lid O-ring (10062-ACC), basket with handle (10063-ACC), pre-filter basket housing (10064-ACC), drain plug with O-ring (10066-ACC), impeller and shaft seal kit (10068-ACC), seal plate (10069-ACC), 0.75 hp motor kit (10070-ACC) and pump union O-rings (10080-ACC).
Who should install it?
AquaPro says only qualified, licensed personnel should install the pump and its wiring, and that improper installation voids the warranty.
Order the 10081-ACC From PST
Backed by PST Pool Supplies' service team.
- Free Shipping
- 30-Day Returns
- Warranty Backed
- Pool Techs on Support
Additional Info
| Category | Pool Products Pool Pumps Single Speed Pumps |
| SKU | PST-34-247-1081 |
| MPN | 10081-ACC |
| Replaces | 902267 |
| Manufacturer | AquaPro |
| Weight | 24.4 lb |