Product Information
Description
Suction is only as good as the air path behind it. These replacement filters fit the Nemo GRABO and the GRABO PRO, and swapping a dust-packed element for a clean one brings a tired suction gripper straight back to full pull.
Changing them takes under a minute and needs no tools:
- Remove the plastic filter cover. Locate the filters on the bottom of your GRABO tool and pull out the plastic ring cover. It comes off by hand.
- Take out the old filter. Remove the dirty filter from its hole. If it is packed with dust or mud, dispose of it properly.
- Insert the new filter. Place the new GRABO filter into the slot, making sure it sits securely.
- Reattach the filter cover. Push the plastic cover back on until it fits snugly.
Dirty filters are normal on tile, stone and paver work. Keep a set in the bag and your vacuum lifter never has a slow day. Compatible with the Nemo GRABO and GRABO PRO gripsters and lifters, the two vacuum grippers that share this filter size.
| SKU | RK34001 |
| Brand | GRABO |
| Condition | New |
This is an accessory for GRABO suction gripsters. It is not a suction gripster on its own.
Additional Info
| Category | Suction Gripster Accessories |
| SKU | RK34001 |
| MPN | |
| Manufacturer | GRIP TECH TOOLS |
| Weight | 0.0 lb |
Let customers speak for us
Super fast shipping and reliable product !
I accidentally broke the original **** by tightening it too much. This was a perfect fit and works 100%. Fast delivery too!
Swapped out broken heater (lasted about 6 years) for this one. The instructions are for the electronics, not for the plumbing. You must get everything perfectly aligned or the plumbing may leak. I needed to loosen the electronics box to get the plumbing perfectly aligned. I have hot water again.
Great prices, fast shipping, great products
Haven't received yet but I'm sure it'll be great
Ordered on Saturday and we're delivered by Tuesday! Great products and great prices!
PST pool supplies are great to work with. I was having trouble finding this heat exchanger . Everywhere I looked, it was out of stock or back ordered. I contacted the manufacturer about buying the heat exchanger. They told me I couldn't buy it because I wasn't a dealer. If I was a dealer, they would be able to take the order. And make one, it would take 5 to 8 weeks. I contacted PST they put my order in and I received it in about six weeks. Fantastic people to work with. Thanks Tim
As described original equipment, thanks
Easy. Came quickly. Wish the shipping was free. I paid extra for insured shipping and it wasn’t signature required. Simply left in my mailbox.
My hot tub stopped giving a signal to trigger the heating core. I had to replace a whole motherboard and they had the perfect product and with a couple of screws. It went right right in and worked perfectly.
Worked perfectly to get our pool filter motor back up and running.
Great price and it was the exact fit for my TM26 Filter.
Easy to install it took 20-25 minutes and it was back up and running with no issues!
Work perfect
Same pump and motor I needed for my pool setup and would’ve been great if I didn’t have to tear apart the new one to install old part. Best price I found anywhere too.