Product Information
Description
Standard size, maximum air flow.
This oval open-cell seal matches the original base of the GRABO HIGH FLOW, no plate required, and it is the right choice when the material is too small for a 300mm or 400mm suction plate.
The open-cell foam is the important part. Closed-cell foam seals by going airtight; open-cell foam deliberately lets air pass through it, which is what the HIGH FLOW needs. The tool is built to out-flow a leak rather than eliminate it, so on porous brick and textured stone this seal grips where an airtight gasket would fight the pump. That is the difference between this suction gripster and an ordinary vacuum lifter.
Rated to hold up to 75 lbs (34 kg). The go-to seal for smaller pavers, bricks and rough surfaces on the GRABO HIGH FLOW gripper. Step up to a 300mm or 400mm plate and seal when the material outgrows what this gripster and lifter combination covers.
| SKU | GHF-OFS |
| Brand | GRABO |
| Condition | New |
This is an accessory for GRABO suction gripsters. It is not a suction gripster on its own.
Additional Info
| Category | Suction Gripster Accessories |
| SKU | GHF-OFS |
| MPN | |
| Manufacturer | GRIP TECH TOOLS |
| Weight | 0.0 lb |
Let customers speak for us
Super fast shipping and reliable product !
I accidentally broke the original **** by tightening it too much. This was a perfect fit and works 100%. Fast delivery too!
Swapped out broken heater (lasted about 6 years) for this one. The instructions are for the electronics, not for the plumbing. You must get everything perfectly aligned or the plumbing may leak. I needed to loosen the electronics box to get the plumbing perfectly aligned. I have hot water again.
Great prices, fast shipping, great products
Haven't received yet but I'm sure it'll be great
Ordered on Saturday and we're delivered by Tuesday! Great products and great prices!
PST pool supplies are great to work with. I was having trouble finding this heat exchanger . Everywhere I looked, it was out of stock or back ordered. I contacted the manufacturer about buying the heat exchanger. They told me I couldn't buy it because I wasn't a dealer. If I was a dealer, they would be able to take the order. And make one, it would take 5 to 8 weeks. I contacted PST they put my order in and I received it in about six weeks. Fantastic people to work with. Thanks Tim
As described original equipment, thanks
Easy. Came quickly. Wish the shipping was free. I paid extra for insured shipping and it wasn’t signature required. Simply left in my mailbox.
My hot tub stopped giving a signal to trigger the heating core. I had to replace a whole motherboard and they had the perfect product and with a couple of screws. It went right right in and worked perfectly.
Worked perfectly to get our pool filter motor back up and running.
Great price and it was the exact fit for my TM26 Filter.
Easy to install it took 20-25 minutes and it was back up and running with no issues!
Work perfect
Same pump and motor I needed for my pool setup and would’ve been great if I didn’t have to tear apart the new one to install old part. Best price I found anywhere too.