Product Information
Description
AquaPro AL50 Above Ground Pool Pump, 0.5 HP, 115V
Quiet flow for soft-sided and above ground pools.
The AquaPro AL50 (MPN 98112-001, PST SKU PST-34-247-1012) is a single-speed 0.5 HP circulation pump built to keep above ground and soft-sided pools clean without overdriving small filters. You get 30 GPM through 1-1/2 inch ports on a 115V/60Hz motor, with a 6 foot cord ready for a standard GFCI outlet. It is the factory replacement pump for the AquaPro AL50 sand filter skid and a clean upgrade for Intex and Bestway pools that have outgrown their stock pump.
Why PST Customers Pick This
Right-Sized 30 GPM Flow
Pushes 30 gallons per minute through 1-1/2 inch suction and discharge ports, matched to the AL50 sand filter and most 12 ft to 24 ft above ground pools.
115V Plug-Ready Power
Runs on a standard 115V/60Hz single phase circuit with a 6 foot factory cord. No hardwiring or sub-panel work for typical above ground installs.
Direct Skid Replacement
Drops straight onto the AquaPro AL50 sand filter skid (Horizon 18-247-W001) and bolts to the same footprint as the original 98112-001 pump.
Tool-Free Strainer Lid
Clear strainer pot lets you spot debris before it loads the filter. Twist-off cap clears the basket in seconds without breaking unions.
Sealed for Outdoor Service
Totally enclosed fan-cooled (TEFC) motor housing shrugs off pool deck splash and seasonal humidity through the swim season.
Soft-Sided Pool Friendly
Low static head and gentle flow make it a safe upgrade for Intex, Bestway, and Coleman ring pools that need more turnover than the stock cartridge unit delivers.
Installation Notice
All 115V pool equipment must be installed on a GFCI-protected circuit per NEC 680. Bond the pump to the pool equipotential grid using the lug provided on the motor. Improper bonding or grounding can energize the pool shell and create a shock hazard.
Specifications
Frequently Asked Questions
What pool size is the AL50 rated for?
The AL50 is sized for above ground and soft-sided pools roughly 5,000 to 12,000 gallons, typically 12 ft to 24 ft round or comparable oval pools. For larger pools or in-ground installs, step up to a 1 HP or 1.5 HP unit.
Will this replace the pump on my AquaPro AL50 sand filter skid?
Yes. This is the factory replacement pump for the AquaPro AL50 sand filter system (Horizon part 18-247-W001). The mounting holes, port heights, and electrical connection match the original 98112-001.
Does it work with Intex or Bestway pools?
Yes. Many owners use the AL50 to upgrade an Intex, Bestway, or Coleman cartridge setup. You will need 1-1/2 inch threaded adapters to bridge from the pool's smaller hose connections. Confirm your hose size before ordering fittings.
Can I install this pump myself?
If you are replacing an existing 115V plug-in pump on a finished pad, yes. You will plumb the two 1-1/2 inch ports, plug into the GFCI outlet, and prime through the strainer pot. New circuits, hardwiring, or bonding work should go to a licensed electrician per NEC 680.
Is it a two-speed or variable-speed pump?
No, the AL50 is a single-speed pump. For two-speed performance on an above ground pool, look at AquaPro's PurFlow 2-Speed line instead.
Order the AquaPro AL50 From PST
Authorized AquaPro Systems dealer. Backed by PST Pool Supplies' service team and ready to ship from our pool equipment warehouse.
Additional Info
| Category | Pool Products Pool Pumps Single Speed Pumps |
| SKU | PST-34-247-1012 |
| MPN | 98112-001 |
| Manufacturer | AquaPro |
| Weight | 11.0 lb |
Let customers speak for us
Very good customer service. The post office screwed up my order and they responded to my msg very quickly and reshipped another part free of charge. 👍👍
I was looking for a part for an old pool filter housing.
Fortunately, I found PST. They had the part and I ordered it on a Friday, and it arrived on Tuesday by FedEx.
The filter housing was updated and different, but once I installed it, it fit perfectly and worked just as it should. I am so pleased with not only the part that I received but also the expert service and at a fair and excellent price.
Thank you, PST Pool Supply, for coming to my rescue. I highly recommend you checking with PST for your pool needs!
Replacement part was correct and vacuum is back together and being used.
Easy fix for small leak around valve in concrete pool.
Definitely recommend this shop!
We are running big and deep pool and we get all what we need from here
I had trouble finding the right part that would fit. PST helped me figure out exactly the right part and fit.
Helped me get my light installed correctly after liner change
This machine cleans 10 times better than my previous one and is worth the cost. However, I’ve only had it for 2 weeks. The last one lasted about 6 months and never cleaned well even though it had 4 stars when I bought it. I hope this new one remains strong for a few years
The pump was a great value and it was described perfectly. The product was shipped fairly quickly and it was well-protected
After much research the value of the product is good. It was shipped fairly quick and it arrive in a well-protected package.
Very happy with this purchase fits and work as described fast shipping
Loved how fast it got here. It has small wiring and I was glad it was in a protective envelope and it arrived without breaking.
