
Product Information
Description
APC 5 Sq Ft Pool Filter Cartridge for Coleco F-120 and Intex Type A
Replaces Unicel C-4607, Pleatco PC7-120, and Filbur FC-3710.
The APC replacement filter cartridge measures 4-1/4 in. diameter by 8 in. length with 5 sq. ft. of pleated media and open 2 in. ends. It is a direct fit for Coleco F-120 and Intex Type A above-ground and Easy Set pools, and cross-references the common C-4607, PC7-120, and FC-3710 cartridges (SKU PST-APCC7333, MPN APCC7333).
| Outer Diameter | 4-1/4 in. |
|---|---|
| Length | 8 in. |
| Top Opening | 2 in., open |
| Bottom Opening | 2 in., open |
| Filter Area | 5 sq ft |
| Media | Melt-blown polypropylene |
|---|---|
| Construction | Closed-cell, pleated, reinforced core |
| Application | Above-ground pool, cartridge filter |
| Brand | APC |
|---|---|
| MPN | APCC7333 |
| SKU | PST-APCC7333 |
| Shipping Weight | 0.5 lb |
- Coleco F-120 (with core)
- Intex Type A pools
- Intex Sand-n-Sun
- Intex Easy Set, Size A or C
- Aqua Leisure Size 2
- Summer Escapes / Wet Set
Will this fit my Intex or Coleco pool?
Yes, if your pool uses a Type A style cartridge measuring 4-1/4 in. by 8 in. with open 2 in. ends. It is a direct fit for Coleco F-120 and Intex Sand-n-Sun, Easy Set, and Type A systems. Measure your old cartridge to confirm before ordering.
How is this different from a Unicel C-4607 or Pleatco PC7-120?
It is an APC-brand equivalent built to the same 4-1/4 in. by 8 in., 5 sq ft dimensions, so it drops into the same housings as the C-4607, PC7-120, and FC-3710 at a lower cost per cartridge.
How often should I replace it?
Rinse the pleats every 1 to 2 weeks during the season and replace the cartridge when the media stays gray after cleaning or the pleats start to break down, typically once per season with regular use.
Additional Info
| Category | Pool Products Pool Filters Replacement Filter Cartridge |
| SKU | PST-APCC7333 |
| MPN | APCC7333 |
| Replaces | FC-3710 |
| Manufacturer | APC |
| Weight | 0.5 lb |