Product Information
Description
APC 6207 Double Sealed Motor Bearing, 35 x 72 x 17 mm (APC6207)
6207 size deep groove ball bearing with rubber seals on both sides
APC APC6207 is a 6207 size double sealed deep groove ball bearing, 35 mm bore x 72 mm OD x 17 mm wide, used as a front or rear bearing in pool and spa pump motors. The rubber seals on both sides keep water and dirt out and the factory grease in.
| Brand | APC |
|---|---|
| Part Number | APC6207 |
| Bearing Series | 6207 |
| Bore (ID) | 35 mm |
| Outside Diameter | 72 mm (2.83 in) |
| Width | 17 mm (0.67 in) |
| Type | Single row deep groove ball bearing |
| Seals | Double rubber sealed (2RS) |
| Lubrication | Sealed, pre-greased |
| Typical Use | Pool and spa pump motor front or rear bearing |
| Sold As | Each |
- Pool and spa pump motors that use a 6207 size bearing
- Match the number stamped on the old bearing and check bore, outside diameter and width
How do I know which bearing I need?
Read the number stamped on the old bearing's seal or outer ring and compare the bore, outside diameter and width. Front and rear motor bearings are often different sizes, so check both before ordering.
Should I replace both motor bearings?
Usually yes. If one bearing is noisy the other has seen the same hours, and the motor is already apart. Disconnect power before working on the motor.
Additional Info
| Category | Parts Pool Parts Pool Pump Parts |
| SKU | PST-APC6207 |
| MPN | APC6207 |
| Manufacturer | APC |
| Weight | 0.61 lb |
Let customers speak for us
Swapped out broken heater (lasted about 6 years) for this one. The instructions are for the electronics, not for the plumbing. You must get everything perfectly aligned or the plumbing may leak. I needed to loosen the electronics box to get the plumbing perfectly aligned. I have hot water again.
Great prices, fast shipping, great products
Haven't received yet but I'm sure it'll be great
Ordered on Saturday and we're delivered by Tuesday! Great products and great prices!
PST pool supplies are great to work with. I was having trouble finding this heat exchanger . Everywhere I looked, it was out of stock or back ordered. I contacted the manufacturer about buying the heat exchanger. They told me I couldn't buy it because I wasn't a dealer. If I was a dealer, they would be able to take the order. And make one, it would take 5 to 8 weeks. I contacted PST they put my order in and I received it in about six weeks. Fantastic people to work with. Thanks Tim
As described original equipment, thanks
Easy. Came quickly. Wish the shipping was free. I paid extra for insured shipping and it wasn’t signature required. Simply left in my mailbox.
My hot tub stopped giving a signal to trigger the heating core. I had to replace a whole motherboard and they had the perfect product and with a couple of screws. It went right right in and worked perfectly.
Worked perfectly to get our pool filter motor back up and running.
Great price and it was the exact fit for my TM26 Filter.
Easy to install it took 20-25 minutes and it was back up and running with no issues!
Work perfect
Same pump and motor I needed for my pool setup and would’ve been great if I didn’t have to tear apart the new one to install old part. Best price I found anywhere too.
Great company to work with!
Came in great condition my kid loves it, fit perfect hes 6 and got a medium.
