Product Information
Description
Aladdin O-654 Chlorinator Lid O-Ring for Waterway, Replaces 805-0340V (APCO2339)
Replacement Viton chlorinator lid o-ring for Waterway off-line
Aladdin O-654 (APCO2339) is a replacement Viton chlorinator lid o-ring for Waterway off-line and pre-2002 in-line chlorinator lids. It replaces Waterway 805-0340V. Size: 3-3/8 in ID x 3/16 in cross section. Check the part numbers against your equipment before ordering.
| Brand | Aladdin |
|---|---|
| Part Number | O-654 |
| Also Listed As | APCO2339 |
| Part Type | Viton chlorinator lid o-ring |
| Fits | Waterway off-line and pre-2002 in-line chlorinator lids |
| Size | 3-3/8 in ID x 3/16 in cross section |
| Material | Viton |
| Replaces (Waterway) | 805-0340V |
| Install Tip | Clean the sealing surfaces before fitting the new part |
| Sold As | Each |
- Waterway Off Line Chlorinator Lid O-Ring/In Line Chlorinator Lid O-Ring, Pre 2002, Viton (805-0340V)
Should I lubricate the new o-ring?
Yes. Wipe on a thin coat of pool-grade silicone or Teflon lubricant before you install it. Avoid petroleum jelly, which can swell rubber o-rings.
How do I confirm it fits my equipment?
Match one of the OEM part numbers listed on this page against your equipment's parts list or the number on the old part. If you only have the old o-ring, compare its size with the size listed here.
Additional Info
| Category | Parts Pool Parts Chemical Feeder Parts |
| SKU | PST-APCO2339 |
| MPN | O-654 |
| Replaces | 805-0340V, 8050340V |
| Manufacturer | Aladdin |
| Weight | 0.1 lb |
Let customers speak for us
Swapped out broken heater (lasted about 6 years) for this one. The instructions are for the electronics, not for the plumbing. You must get everything perfectly aligned or the plumbing may leak. I needed to loosen the electronics box to get the plumbing perfectly aligned. I have hot water again.
Great prices, fast shipping, great products
Haven't received yet but I'm sure it'll be great
Ordered on Saturday and we're delivered by Tuesday! Great products and great prices!
PST pool supplies are great to work with. I was having trouble finding this heat exchanger . Everywhere I looked, it was out of stock or back ordered. I contacted the manufacturer about buying the heat exchanger. They told me I couldn't buy it because I wasn't a dealer. If I was a dealer, they would be able to take the order. And make one, it would take 5 to 8 weeks. I contacted PST they put my order in and I received it in about six weeks. Fantastic people to work with. Thanks Tim
As described original equipment, thanks
Easy. Came quickly. Wish the shipping was free. I paid extra for insured shipping and it wasn’t signature required. Simply left in my mailbox.
My hot tub stopped giving a signal to trigger the heating core. I had to replace a whole motherboard and they had the perfect product and with a couple of screws. It went right right in and worked perfectly.
Worked perfectly to get our pool filter motor back up and running.
Great price and it was the exact fit for my TM26 Filter.
Easy to install it took 20-25 minutes and it was back up and running with no issues!
Work perfect
Same pump and motor I needed for my pool setup and would’ve been great if I didn’t have to tear apart the new one to install old part. Best price I found anywhere too.
Great company to work with!
Came in great condition my kid loves it, fit perfect hes 6 and got a medium.
